You are not logged in.

#1 2021-02-23 20:56:53

DarkOwl
Moderator

How to disable nanotech? - Taygetan info

In Gosia's latest video about the PCR tests, Swaaru mentioned a way to disable nanotech and that there was info around on how to make the device. Does anyone know where to find that information? (and how to use it without tasering yourself LOL)

Mentioned at @ 5m07s
https://lbry.tv/@CosmicAgency:c/pcr-tes … ys-yazhi:7

Last edited by DarkOwl (2021-02-23 21:18:08)


feeling owl-sley

Offline

#2 2021-02-23 21:23:51

DarkOwl
Moderator

Re: How to disable nanotech? - Taygetan info

This is the video Swaaru mentioned I believe. There is a pic from @4m07s in the above video.
And here is the YouTube vid connected to that image

https://www.youtube.com/watch?v=tuuztYor450


feeling owl-sley

Offline

#3 2021-02-23 21:27:10

DarkOwl
Moderator

Re: How to disable nanotech? - Taygetan info

Questions for Swaaru (or anyone else for that matter):

1) How close to the body should the device be?
2) How long should the device be held in one position on the body?
3) What parts of the body should the device be used (do you run it over the entire body?


feeling owl-sley

Offline

#4 2021-02-23 22:27:11

DarkOwl
Moderator

Re: How to disable nanotech? - Taygetan info

The high voltage boosters mentioned in the YouTube tutorial seem to be out of stock. Anyone know where to get one?

https://calcuttaelectronics.com/product … st-module/

https://primerobotics.in/dc-6v-400kv-bo … line-india


feeling owl-sley

Offline

#5 2021-02-24 00:03:39

Robert369
Member

Re: How to disable nanotech? - Taygetan info

DarkOwl wrote:

The high voltage boosters mentioned in the YouTube tutorial seem to be out of stock. Anyone know where to get one?

https://www.banggood.com/Geekcreit-DC-3 … ehouse=USA


Helping people to self-empower and liberate themselves, and by that ultimately the whole planet and beyond. See my profile for means to connect.

Offline

#6 2021-02-24 00:16:33

DarkOwl
Moderator

Re: How to disable nanotech? - Taygetan info

Robert369 wrote:
DarkOwl wrote:

The high voltage boosters mentioned in the YouTube tutorial seem to be out of stock. Anyone know where to get one?

https://www.banggood.com/Geekcreit-DC-3 … ehouse=USA

Thank-you my friend smile


feeling owl-sley

Offline

#7 2021-02-24 15:32:22

Initnotofit
Member

Re: How to disable nanotech? - Taygetan info

Great info, thanks, but is it 900 watts as they said was the minimum, does anyone know.

I am going to make one of these as well, I have followed this guy over the years and he seems quite gifted.

https://www.youtube.com/watch?v=yVyfRVq … sBeadWorks

Last edited by Initnotofit (2021-02-24 15:40:01)

Offline

#8 2021-02-24 16:28:37

Robert369
Member

Re: How to disable nanotech? - Taygetan info

Initnotofit wrote:

Great info, thanks, but is it 900 watts as they said was the minimum, does anyone know.

I am going to make one of these as well, I have followed this guy over the years and he seems quite gifted.

https://www.youtube.com/watch?v=yVyfRVq … sBeadWorks

Talking about watts is not useful in regards to destroying nano-bots, because it is all about the electric (voltage) and magnetic (current) field strength, which can be applied on a device separately to destroy it. Hence I suggest to two different simple device types, one based on current (which is basically creating a high current impulse through a full-body coil by short cutting a car battery through it for a miniscule amount of time) and the other on voltage as described above.

Only using both in combination (aka voltage and current) and at the same time creates power (aka watts), and that is totally not needed, by that making device simple and cheap due to not requiring high power.

One could even create a combination device that produces a high current and a high voltages in sequence, by that destroying nano-bots easily but not needing much power at all, while being way less dangerous for the body (which doesn't like wattage!).

In fact, this destruction is less about the power of each of the E or M pulses than about the sharpness of the spike, as that creates scalar waves which multiply the output energy waves. Since fake-science lies about all this anyways, not even explaining properly what energy or electricity are, I explain these topics on my own platforms - this surely goes beyond what this forum is about.

Insofar I could care less about whatever information Swaruu gave on this topic, as the amount of electrical power depends on how it is applied.


Helping people to self-empower and liberate themselves, and by that ultimately the whole planet and beyond. See my profile for means to connect.

Offline

#9 2021-02-24 18:36:41

DarkOwl
Moderator

Re: How to disable nanotech? - Taygetan info

Initnotofit wrote:

Great info, thanks, but is it 900 watts as they said was the minimum, does anyone know.

I am going to make one of these as well, I have followed this guy over the years and he seems quite gifted.

https://www.youtube.com/watch?v=yVyfRVq … sBeadWorks

This seems a much safer device to use than the one I posted. Thank you for that! smile


feeling owl-sley

Offline

#10 2021-03-03 19:34:53

RoadtoSamadhi
Member

Re: How to disable nanotech? - Taygetan info

DarkOwl wrote:

Questions for Swaaru (or anyone else for that matter):

1) How close to the body should the device be?
2) How long should the device be held in one position on the body?
3) What parts of the body should the device be used (do you run it over the entire body?


I am also interested in these questions because I have a friend that has taken the covid test , and I can’t talk to her until I disable the nanotechnology , I’m kidding but  we can’t just leave her as a walking wireless camera.  How can we ever maintain a relationship if everything she sees , THEY see ?


I am also willing to buy the device premade

CALLING IN THE ASSIST , HELP US SWARUU TEAM !

Last edited by RoadtoSamadhi (2021-03-03 19:46:01)

Offline

Board footer

Powered by FluxBB